How to build a Dog House

Materials

1 - 4'x8'x5/8" Exterior Grade Plywood Sheet (not PT or Interior)

2 - 2"x4"x8' Pressure Treated Boards

1 - 2"x2"x8' Untreated Boards

1 - Box 1-5/8" Galvanized Deck Screws

1 - Box of 16d(penny) Galvanized nails

1 - Quart Exterior Paint or Stain

1 - Bundle Composite Roof Shingles

1 - Tube of Wet/Dry roof cement for caulking gun

(Don't use pressure treated wood on any parts the dog may chew. It contains poisons that could seriously hurt your dog.)

Tools

Tape measure

Circular saw (or table saw)

Drill (any type)

Screw driver bit

Spade Bit or "Paddle" Bit (3/4" or larger)

Hammer (16oz.)

Paint Brush

Pencil

Safety Glasses

Carpenter's Square

Caulking Gun

Some fundamental things to remember are that the doghouse should be raised up off the ground to keep out moisture and help insulate the floor for the dog from the cold.

The doghouse should be large enough for the dog to comfortably turn around but small enough to keep the dog's body heat close. Exterior grade cushions or pads can also be added for comfor for the dog.