How to Make Spooky Halloween Signs

Things You'll Need:

• Extruded polystyrene foam board
• Medium grit sandpaper
• Flathead screwdriver
• Dark brown flat latex paint
• Tan flat latex paint
• 1-2-inch-wide paint brush

Instructions

1. Step 1

   Cut the board down to a desirable size. An average sheet of board is usually four feet by eight feet long. Depending upon the size of your sign, you can cut two to four signs from one sheet.

2. Step 2

   Run the flat edge of the screwdriver along the board's surface to create large wood lines, dents and gouges. Use the folded edge of the sandpaper for smaller creases. Also apply deeper grooves into the board's edges and then sand the entire board down for a naturally worn look.

3. Step 3

   Apply the brown base coat of paint. Fully cover the board, including inside every crease. Allow the paint to dry completely.

4. Step 4

   Coat your paintbrush with the tan colored paint and remove any excess paint, so that only a thin layer remains. Gently drag the brush across the surface, perpendicular to the wood lines to bring out the darker wood lines beneath. Allow the paint to dry completely.

5. Step 5

   Personalize your sign a scary message such as "Beware," "Haunted House" or "Keep Out."